Omron R88M-K2K030C-BS2 replacement overview
The Omron R88M-K2K030C-BS2 should be sourced by the full part number, including the K2K030C-BS2 suffix. Omron's current product page identifies this model as a 2 kW, 400 VAC, 3000 rpm servomotor with absolute encoder, brake, and key shaft. Because R88M variants can differ mechanically and electrically, the installed nameplate and machine documentation should drive the replacement decision.
What to verify before ordering
- Exact label: match R88M-K2K030C-BS2 character for character.
- Motor rating: confirm 2 kW output, 400 VAC voltage class, and 3000 rpm speed against the installed unit.
- Feedback and brake: verify the absolute encoder, brake option, brake wiring, and cable requirements.
- Mechanical fit: compare key shaft style, flange, mounting dimensions, connector orientation, and machine-side coupling.
- Drive compatibility: confirm the matching Omron servo drive or amplifier family before installation.
- Condition: this listing is available as Used in Great Condition when serviceable used stock is acceptable.
Common replacement mistakes
Do not assume another R88M motor is interchangeable because the prefix is similar. Changes in feedback type, brake configuration, shaft, connector, voltage class, or drive family can prevent commissioning or create unsafe machine behavior.
Regional sourcing note
Outdwella supports industrial spare-parts buyers in North America, Australia, Europe, and the Middle East. European pricing may include the store's higher regional pricing layer. Always confirm local electrical, safety, import, and commissioning requirements before installation.
Related Outdwella pages
- Shop Omron R88M-K2K030C-BS2
- Browse servo drive accessories
- Browse AC servo drives
- Browse servo drive boards
- Read the broader Omron R88M guide
- North America parts sourcing
- Europe parts sourcing
- Australia parts sourcing
- Middle East parts sourcing
Independent reseller notice
Outdwella is an independent reseller and is not affiliated with Omron. Manufacturer names and part numbers are used only to identify compatible industrial spare parts.